Best Bambu Lab A1 Mini Vs Bambu Lab P1s — Expert Picks & Deals (November 2026)
Bambu Lab A1 mini vs Bambu Lab P1S
The Bambu Lab A1 mini and the Bambu Lab P1S are the two ends of Bambu Lab's beginner range: the cheapest, easiest first printer and the enclosed printer to grow into. In 2026 the best beginner printers arrive pre-assembled, calibrate themselves, and produce a clean first print in about twenty minutes — and both of these do exactly that. The hard part is choosing: the A1 mini costs $199 as reviewed, the P1S costs $349, and the right answer depends on what you want to print in two years, not just next weekend.
The Bambu Lab A1 mini is the default recommendation for a first 3D printer, and it is not close. It arrives pre-assembled and pre-tuned, sets up in about 20 minutes, and runs a full automatic calibration before every print — bed levelling, nozzle checks and vibration compensation, all without you touching anything. The build volume is a 180 mm cube, the top speed is rated at 500 mm/s, and it prints PLA, PETG, TPU and PVA. On Bambu Lab's US store it costs $199 on sale as reviewed, against a $219 typical price. The 180 mm build volume is the only real limitation: it covers toys, phone stands, desk organisers and small replacement parts, but not helmets, large vases or full-size cosplay pieces. It is an open-frame printer, so it cannot print ABS well, and it runs quiet at under 48 dB in silent mode.
The Bambu Lab P1S is the printer for the beginner who already knows they will get hooked. It is an enclosed CoreXY machine with a 256 mm build volume — the same size as the A1 — but the enclosure, faster CoreXY motion and active chamber temperature control mean it prints ABS, ASA and other engineering filaments that open-frame printers struggle with. On Bambu Lab's US store it costs $349 on sale as reviewed, which makes it the cheapest enclosed printer from a major brand in 2026. The enclosure also makes it quieter and safer around children and pets, and it keeps dust and draughts away from prints. The trade-off is price: at $349 it is $150 more than the A1 mini, and the enclosed design makes nozzle and bed access slightly more fiddly.
What to look for
- Check the build volume against what you want to print. The A1 mini's 180 mm cube is the key decision here. Measure the largest thing you expect to print; if it is bigger than 180 mm in any direction, the P1S's 256 mm build volume is the answer.
- Start with PLA. Every printer here prints PLA beautifully, and PLA is cheap, easy and safe. Do not buy a printer for ABS or nylon until you have printed a month of PLA — you may never need anything else.
- Think about filaments. Only buy an enclosed printer if you plan to print ABS, ASA or nylon, which need a warm, draught-free chamber. For PLA and PETG — the filaments beginners should start with — an open-frame printer like the A1 mini is fine.
- Budget for filament and accessories. A spool of PLA costs $20–$25, and you will want two or three to start, plus a scraper, spare nozzles and a deburring tool. Add $60–$80 to the printer price for a sensible first order.
- Think about where it will live. 3D printers are not silent — the A1 mini runs under 48 dB in silent mode, which is quiet for a printer, but it is still a machine with fans and motors. A spare room or garage is ideal; a bedroom is not. The P1S's enclosure makes it quieter and safer around children and pets.
- Multi-colour is an add-on on both: Bambu Lab's AMS lite prints in up to four colours, and the A1 mini Combo includes it for $299 on sale as reviewed. Colour changes add waste and print time, so start with single-colour printing.
Top picks
The Bambu Lab A1 mini is the best 3D printer for beginners overall. It is the cheapest, easiest way to find out whether you love 3D printing, and most people will never need more. It sets up in about 20 minutes, calibrates itself before every print, and costs $199 on sale as reviewed.
The Bambu Lab P1S is the best beginner printer to grow into. If you are buying for a household with kids, or you already know you want to print functional parts in ABS, the P1S is worth the step up — the enclosure, CoreXY speed and active chamber temperature control make it the cheapest enclosed printer from a major brand in 2026.
Frequently asked questions
What is the best 3D printer for a complete beginner?
The Bambu Lab A1 mini. It arrives pre-assembled, sets up in about 20 minutes, calibrates itself before every print, and costs $199 on sale. It is the easiest first printer you can buy.
Is the A1 mini too small?
For most beginners, no. Its 180 mm cube covers toys, phone stands, organisers and small parts. If you want to print larger objects, the P1S has a 256 mm build volume — and so does the Bambu Lab A1, which sits between the two at $259 on sale.
Do I need an enclosed printer?
Only if you plan to print ABS, ASA or nylon, which need a warm, draught-free chamber. For PLA and PETG — the filaments beginners should start with — an open-frame printer like the A1 mini is fine. The P1S's enclosure is what lets it print ABS and ASA well.