Best Ssds For Ps5 Sn850x Vs 990 Pro — Expert Picks & Deals (November 2026)
SSDs for PS5: SN850X vs 990 Pro
The launch PlayStation 5 ships with 825GB of storage and only about 667GB of it is usable, and modern games are enormous — a single blockbuster can take 100GB or more. The fix is Sony's built-in M.2 expansion slot: a ten-minute install that can double or triple storage. Once installed and formatted, the M.2 drive can download, copy and launch PS5 and PS4 games just like the internal storage, while an external USB drive can only store PS4 games and PS5 game backups — it cannot run PS5 games.
Sony's official requirements are strict, and they are the reason some fast PC drives do not work in a PS5. The drive must be an M.2 NVMe SSD on a PCIe Gen4 x4 interface with a Key M connector, in form factor 2230, 2242, 2260, 2280 or 22110, with a capacity between 250GB and 8TB. Sony recommends a sequential read speed of 5,500 MB/s or faster, and M.2 SATA drives are not supported, even though they use the same physical connector. PCIe Gen5 drives offer no benefit in a PS5 — the console caps speeds at Gen4, so do not pay the Gen5 premium.
Cooling is not optional. Sony requires a heatsink or heat-transfer sheet, and the whole assembly — drive plus cooling — must fit within 110 mm long, 25 mm wide and 11.25 mm tall. That 11.25 mm height limit is where most buyers get caught: a tall desktop heatsink will not fit under the bay cover. The simplest route is to buy a drive sold with a factory-fitted heatsink, which is what every pick in this comparison offers.
How to choose
- Buy a drive with a factory-fitted heatsink that keeps the whole assembly within Sony's 11.25 mm height limit.
- Check the exact part number before ordering, especially on the WD Black SN850X, where the heatsink version is part number WDS200T2XHE.
- Pick 2TB as the sweet spot for most players: enough room for a large modern library without paying the 4TB premium, with Sony supporting 250GB to 8TB.
- Do not pay for a Gen5 drive: the PS5 caps speeds at Gen4, so a Gen5 drive delivers Gen4 performance for a Gen5 price.
- Weigh endurance if you reinstall games constantly: the Seagate FireCuda 530 has among the highest endurance ratings in this class.
- Consider the officially licensed option if you want zero doubt about compatibility: the WD Black SN850P is the only drive here officially licensed for PlayStation 5.
Top picks
The WD Black SN850X with Heatsink is the best SSD for PS5 for most owners. The 2TB heatsink model is a PCIe 4.0 x4 NVMe drive rated at 7,300 MB/s sequential read and 6,600 MB/s sequential write, with 1,200 TBW of endurance and a 5-year warranty. Its heatsink is about 8.8 mm tall, comfortably inside Sony's 11.25 mm limit, and the drive uses TLC NAND with an onboard DRAM cache for steady performance. It also comes in 1TB, 4TB and 8TB. Recent listings for the 2TB heatsink model ranged from about $390 to about $440 as reviewed, though SSD prices have been volatile.
- Samsung 990 Pro with Heatsink — best overall: rated at up to 7,450 MB/s sequential read and 6,900 MB/s sequential write, with 1,200 TBW of endurance and a five-year warranty on the 2TB model. Its factory-fitted heatsink clears Sony's 11.25 mm limit with room to spare, and Samsung has verified PS5 compatibility through its own installation and game-loading tests. It is usually the most expensive 2TB heatsink drive here.
- Seagate FireCuda 530 with Heatsink — best endurance: rated at up to 7,300 MB/s sequential read, with a slim heatsink designed for the PS5 expansion slot, a five-year warranty and Seagate's Rescue Data Recovery Services. Its endurance rating is among the highest in this class, which matters if you write a lot of data to the drive over years of use.
- Crucial T500 with Heatsink — best budget pick: rated at up to 7,400 MB/s sequential read, putting it within a few percent of the fastest drives here, but it typically sells for noticeably less. Independent roundups describe it as offering about 95% of the performance at about 70% of the price of the flagship drives.
- WD Black SN850P — officially licensed for PS5: essentially the SN850X tuned for the console, with up to 7,300 MB/s sequential read and 6,600 MB/s write and a low-profile heatsink designed for the PS5 expansion bay. The licence does not make it faster, but it does mean the fit and the firmware have been validated against Sony's requirements. It costs a little more than the SN850X.
Frequently asked questions
What size SSD should I buy for my PS5?
2TB is the sweet spot for most players: enough room for a large modern library without paying the 4TB premium. Sony supports capacities from 250GB to 8TB.
Do I need a heatsink for a PS5 SSD?
Yes, effectively. Sony requires a heatsink or heat-transfer sheet, and the whole assembly must stay within 11.25 mm of total height. A bare drive will overheat and throttle in the enclosed bay. Buy a drive with a factory-fitted heatsink and you skip the problem entirely.
How long does it take to install a PS5 SSD?
About ten minutes with a Phillips screwdriver: update the system software, power off, remove the cover and bay cover, insert the drive, fasten it, replace the covers and format it when prompted. Formatting erases everything on the drive, so after formatting go to Settings > Storage > Installation Location and choose the M.2 SSD for PS5 games.